[Download] Delta DVP04AD-S Manual Delta Analog Programming-Delta Manual 100% Real
Delta DVP-04AD-S is the Analog Input Module and The DVP04AD-S is made by Delta Electronics. The origin of the Delta DVP04AD-S Analog Input Module is China or Taiwan. The Delta DVP-04AD-S analog Input module can Read/Write data by using From/TO Commands via DVP-PLC SS/SX/SA Series MPU. However, today I would like to share the Delta DVP04AD Manual Delta Analog Programming manual also the download process manually.
The Delta DVP-04DA-S analog Input module Received External 4 Points analog signal inputs Voltage or Current and it converts into a 14-bit digital signal. There are 49 control resistors (CR) in each module and 16 bits in each resistor.
+Easy to Setup Because Of Size (Slim Type) is very small.
+The Delta DVP-04AD-S analog Input module Power & Module units are separate.
+Users can easily select the Input voltage or Input Current via the Wiring.
+For input voltage Range is -10V to +10V DC and Resolution is 1.25mv. For Input Current Range is -20mA to +20mA DC and Resolution is 5µA.
Model Description of Delta Input Module
+DVP: Series of Product
+04: Input +Output Channel
+AD: Model Type Analog Input Module
+S/P/H: For SS Series (Main power Unit) MPU, For EP Series (Main power Unit) MPU, For EH Series (Main power Unit) MPU
Description of The Delta Analog Input Module
The Delta DVP-04AD-S analog Input module has fourteen (14) parts such as
+01. Status Indicator (Power, Run, and Error)
+02. Model Name
+03. DIN Rail Clip
+04. I/O Terminal
+05. Input-Output point indicator
+06. Mounting hole of the Expansion Unit
+07. Expansion Port
+08. Expansion Unit Clip
+09. Name Plate
+10. Mounting Rail
+11. RS485 Communication Port
+12. 24V DC Power Input
+14. Expansion Port External
From Instruction Description
From Instruction Read CR From Module
m1: Special Module Number (K, H, D)
m2: Number of Control Resistor (CR) (K, H, D)
D: Location to save Read Data (KnY, KnM, KnS, T, C, D, E, F)
n: Scan Time (K, H, D)
All CR Control Resistor and Specifications of DVP04AD-S
See the figure All CR Description and Specification of DVP-04AD-S Delta Input Module
Programming of Delta DVP04AD-S:
+Step 01: Click On the Auxiliary setting for extension Module
+Step 02: Select Module Number (0-7) and Select the Model DVP-04AD-S then click on Setup
+Step 03: Select Input Mode Setting CR Number #1 then click on write resistor and click preview and Add to List, Then Select Input present Value CR Number#12 then click on Read resistor and click preview and Add to List.
+After the Delta DVP- 04AD-S Programming.
Wiring Connection of DVP-04AD-S
Please Follow the Wiring Diagram for the Any Project
>>>>>Google Drive Delta Analog Programming Download Link>>>>>
We have given the [Download] Delta DVP04AD Manual Delta Analog Programming manual google drive link to download your required manual.
Thanks and best regards