[Download] Delta LCSoft-V1.13 “Delta Loadcell” Calibration Software Free
Load Cell is a Sensor or Transducer and It Converts a Force (Tension, Compression, Pressure, and Torque) to Electrical Energy and is Used to measure the Weight. The load cell Provides 4 wires and 6 wires, also If You want to Weight measurements for any project then you have to Use a Load Cell Module. However, today I would like to share the [Download] Delta LCSoft V1.13 Delta Loadcell Calibration Software With you, also how to download and install the Delta LCSoft Software.
Software Delta LCSoft_V1.13 is used to Configure the Load Cell Module for Delta DVP Series PLCs. Through this software we can Calibrate Easily LoadCell in the Factory or any sector; So Delta LCSoft software is very helpful for Automation Engineers/Programmers.
Description of Seven types of Load Cell
+01: Single Point Load, Cell Used to small and Medium Project
+02: Beam Load Cell, used to tank, Process, and Plant Engineering
+03: Canister Load cell, used to larger Weight
+04: S-Type Load Cell, used for static and dynamic Load
+05: Compression Load Cell, used for large-scale weighbridge, Hopper, and Truck Scale.
+06: Spoke Type Load Cell, Used to Low Profile, High Precession, and High Force Systems.
+07: On-Board Load Cell, Used for Truck, Tractors, and Others Vehicles
A DVP Series PLC Can Read Data in a Load cell Module and Write Data to a Load cell Module, by using (From/To) instruction. If we want to use the Load Cell Module then first of all we will select the DVP PLCs. Supported DVP series PLC CPUs Such as DVP-SA2 Series PLCs, DVP-SX2 Series PLCs, DVP-SV Series PLCs, and DVP-EH2-L Series PLCs, Left Site Extension Module, which use the load cell module. A Delta Load Cell Module Has two communication Port RS232 and RS485
Software-Supported “Operating System”
+Microsoft Win-XP/Vista/7, (32 bit, 64bit version)
+Microsoft Win -8, 64 bit
+Microsoft Win -8.1-64 bit
+Microsoft Win -10-64 bit Version
Supported Model of the Software
DVP-01LC-SL, DVP-02LC-SL, DVP-201LC-SL, DVP-202LC-SL, DVP-211LC-SL
LCSoft “Software Setup” process
+01: Download Software then Extract the Software and click Setup and Yes
+02: Click “Next”
+03: Choose “location” or Click “Install” and wait and installation, when installation is done click Finish
>>>> [Download] Delta LCSoft V1.13 Delta Loadcell Calibration Software Google Drive Link.
We have given the software link [Download] Delta LCSoft V1.13 Delta Loadcell Calibration Software so click on the below and download the Delta LCSoft software.
+ [Download] LCSoft Delta Load Cell Module Configure Software
Thanks & Best Regards